SOFTWARE
Let’s Embrace the Benefits Offered by the Following Global Software Leaders
Exploration & Production
PVTsim Nova is a versatile PVT simulation program developed by Calsep for reservoir engineers, flow assurance specialists, PVT lab engineers and process engineers. PVTsim Nova is an upgrade of the PVT simulation package PVTsim.
Based on an extensive data material collected over a period of more than 30 years, PVTsim Nova carries the information from experimental PVT studies into simulation software in a consistent manner and without losing valuable information on the way.
PVTsim Nova is a petroleum phase behavior at the tip of your fingers.
Geomechanics and Sand Management Consultancy
This solution has been designed to develop Drilling, Petroleum, and Reservoir Engineers knowledge to a level where able apply Geomechanics Modelling in practical situation.
The work flow will improve the end users understanding of both the underlying principles used in identifying sand strength or applying sand control techniques, miximising drawdown constraints in completions with or without sand control.
By utilies our proprietery software as integreted geomechanical and sanding model, this tool incorporates database capabilities that allow the management of both individual well, and full field data. With the capability of full data integrition, calculation can be completed quickly for any well ind the database. Best practices in geomechanics and data tiding are secondary benefits in such a setup.
FracPro – Fracture Design & Analysis
Hydraulic fracturing is a complex process—variations in the breakdown and treatment pressures, complex lithologies that challenge fracture growth, and tight pumping schedules. The simulator brings decades of field-proven reliability to your frac design, simulation, and post-job analysis.
Our intelligent modeling and integrated analytics streamline your treatment workflows, mitigate screenouts occurrence, and deliver stage by stage actionable insights—from initial planning through post-frac evaluation.
Secondary EOR - Advanced Plasma Pulse Technology
This technology is capable of significantly increasing production and enhancing recovery of hydrocarbons in most subsurface formations. The tool cleans the wells completed production intervals to change the wells inflow characteristics by fixing near wellbore damage while increasing the mobility of hydrocarbons within the surrounding reservoir.
Principally, the elastic vibration into natural heterogenous reservoirs initiates resonant frequencies of “Plasma Waves” that increase the relative mobility of crude oil to water. It is relatively inexpensive to treat a well because it is deployed on standard wire line cables and the service tools and crews are mobile.
Well Drilling Performance
All about Flow Assurance
Advanced Transient Multiphase Flow Simulator
LedaFlow® is the product of ten years of innovative development by SINTEF sponsored, guided and supported by TOTAL and ConocoPhillips, commercialised and developed further by KONGSBERG. LedaFlow® is based on models that are closer to the actual physics of multiphase flow and provides a step change in detail, fidelity, quality, accuracy and flexibility over existing multiphase flow simulation technology.
LedaFlow® has been extensively validated against the best available and most comprehensive experimental data sets to ensure that the models are as representative as possible. LedaFlow® is designed with an intuitive user interface to ensure that productivity is improved and with a comprehensive relational database to ensure that all cases are stored and readily available.
MODEL FEATURES
LedaFlow® is used in flow assurance calculations for wells and flowlines for:
- Liquid management
- Line sizing and route selection
- Thermal inhibitors and design
- Slug catcher sizing
- Contingency planning
- Hydrate, wax and corrosion monitoring
The LedaFlow® simulator offers an extensive package of functionality that does not require additional modules to complete standard studies. LedaFlow® provides the first commercially available solution to accurately predict hydrodynamic slug behaviour without user input.
A New and Powerful Dynamic Process Simulation Tool
Enhanced dynamic simulation tool enables more confidence in system and process design.
Kongsberg Oil & Gas Technologies has launched K-Spice, its next generation dynamic process simulation tool. In addition to a wealth of sophisticated new and improved features for system management, thermodynamics, solvers and a flexible and intuitive graphical user interface, K-Spice combines the very best of the proven, class leading D-SPICE and ASSET lifecycle simulation solutions from KONGSBERG.
"Our extensive and unique experience has been channelled into K-Spice, allowing us to develop a powerful, flexible dynamic process simulation solution for the oil & gas market. K-Spice offers a wide range of improvements including a modern, intuitive user interface, simplified data handling, enhanced calculations and increased robustness and performance," comments Eliot Clutten, Head of Product Development for the Simulation & Optimisation business unit at Kongsberg Oil & Gas Technologies.
K-Spice enables detailed dynamic simulation of oil and gas processes and control systems throughout the whole process lifecycle. K-Spice is a Windows based tool with a flexible and intuitive graphical user interface and a wealth of advanced features. K-Spice is designed for use across the core applications of: Project feasibility/concept selection, Pre-engineering/detailed engineering, Commissioning/production start-up, Operator Training and Online operations/maintenance support/process optimisation. Within each application K-Spice offers a multitude of functionality based on high-fidelity simulation models that can be re-used at every stage of the project.
K-Spice forms the basis of a wide variety of solutions from KONGSBERG, including conceptual process studies, engineering verification, control system checkout, operator training and real-time production monitoring systems. The range of applications is steadily growing in order to meet new trends in the industry – in particular for Integrated Operations (IO).
Facility & Integrity Engineering
UniSim® Design
The Leading Process Simulator (Design Operate Optimize)
Honeywell’s UniSim® Design software is an intuitive and interactive process modelling software that enables engineers to create steady-state and dynamic models for plant design, performance monitoring, troubleshooting and operational improvement.
The oil and gas production, gas processing, petroleum refining and chemical industries must optimize their process designs to achieve more reliable and stable operations. With latest version of R442, Unisim Design offers:
- UniSim Steady State & Dynamic
- UniSim Flare
- EO Blowdown Utility to accurately predict the blowdown behavior of pressure vessels and allow for safer, more complete & precise blowdown studies, lower CAPEX for greenfield or brownfield expansion projects
- Continuous interface with other 3rd party software
- Compatibility with Aspen Technology’s HYSYS
- Free trial of simulation software
- UniSim PIPESYSTM option
Uniformance®PHD Provides Rich History
Honeywell’s Uniformance® Process History Database (PHD) collects, stores, and replays historical and continuous plant process data, increasing data security and improving process performance. PHD helps engineers and plant managers make better and faster decisions with superior data management.
Health, Safety, and Environment
Risk and Safety Studies in 3D using CFD Modeling
We will assist you in selecting the appropriate 3D software for risk & safety assessment such as gas dispersion, explosion study, fire mapping and assessment, etc..
State-of-the-art Noise Prediction Software
CadnaA (Computer Aided Noise Abatement) is the leading software for calculation, presentation, assessment and prediction of environmental noise. With more than 30 implemented standards, powerful calculation algorithms, extensive tools for object handling, outstanding 3D visualization and the very user-friendly interface CadnaA is the perfect software to handle national and international noise calculation and noise mapping projects of any size.
Monitoring Optimization Performance
KELTON® is an independent company specializing in measurement consultancy, auditing, training and the provision of specialist software. KELTON® is an Investor in People.
Founded in 1991, KELTON® employs more than 30 consultants with over 500 man years of experience in the management, operation and maintenance of flow measurement systems and an outstanding reputation in the industry. UKAS accreditation supports the consultancy services with the scope encompassing the certification of Hydrocarbon Measurement and Allocation Systems.
FM2P®.net is the KELTON® Fiscal Metering Management Suite of commercially available software and applications developed to manage all key measurement activities. KELTON® is a Microsoft Certified Partner.
Transmission, Distribution & Industrial
An Eaton Company
CYME International T&D is a world-class Power Engineering Solution provider with an established reputation for customer responsiveness and technical experts.CYME International offers some of the most advanced analysis tools for transmission, distribution, and industrial power systems
